FC51 Micro Drive
Please phone for our best prices
VLT® Micro Drive is a genuine VLT® frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to commission.
Terminal numbers are named in the same manner as in the rest of the VLT® family.
Despite the compact size and the easy commissioning, VLT® Micro Drive can be set up to perform perfectly even in complex application set-ups.
Approximately 100 parameters can be set to optimize energy efficiency and operation.
Coated PCB standard For harsh environments.
Real space saving side-by-side A compact book style design allows real side by side mounting without derating.
Minimum penetration of dust VLT® Micro Drive is designed to keep the forced ventilation away from the electronics.
Printed circuit boards are well protected inside the drive.
Built-in RFI Radio disturbance from motor cables is limited with the built-in RFI filter allowing for 15 m motor cables (screened). Meets EU norms.
Built-in brake functions With built in DC and AC brake functions, VLT® Micro Drive can transform kinetic energy in the application into braking power to slow down the motor. A brake chopper is built-in the drives from 1.5 kW upwards.
Display options Numerical Local Control Panel; -Without potentiometer(LCP 11) -With potentiometer(LCP 12)
LCP Remote mounting kit with 3m cable.
Accessories
NEMA Type 1 kit IP21 / NEMA 1 kit (for frame M1, M2 and M3)
Decoupling plate kit.
DIN rail mounting kit (for frame M1 and M2)
Specifications
Mains supply (L1, L2, L3): 1 x 200–240 V ±10% 3 x 200–240 V±10% 3 x 380–480 V ±10% Output data (U, V, W): Output voltage.0–100% of supply voltage Output frequency 0–200 Hz (VVC+ mode), 0–400 Hz(U/f mode)
Switching on output
Unlimited Ramp times 0.05–3600 sec
Digital inputs: Programmable inputs 5 Logic PNP or NPN Voltage level 0–24 V Pulse inputs: Programmable inputs 1* Voltage level 0–24 V DC (PNP positive logic) Pulse input frequency 20–5000 Hz * One of the digital inputs can be used for pulse inputs.
Analog input: Analog inputs 2 Modes 1 current and 1 voltage or current Voltage level 0 – 10 V (scaleable) Current level 0/4–20 mA (scaleable) Analog output: Programmable analog outputs 1 Current range at analog output 0/4–20 mA
Relay outputs: Programmable relay outputs 1 (240 VAC, 2 A)
Approvals: CE, C-tick, UL
Fieldbus communication: FC Protocol Modbus RTU
Manuals & Literature:
JSR Technology