MCC 101 Sine wave filters
Range
3 x 200 – 500 V, 2.5 – 1,200 A
3 x 525 – 690 V, 13 – 1,320 A
Enclosures
IP00 and IP20 enclosure in entire power range
Mounting
• Side by side mounting with the drive
• Filters wall mounted up to 115 A and floor mounted above that size
The perfect solution for:
• Applications with older motors
• Aggressive environments
• Applications with frequent braking
• 690 V applications with general purpose motors
Features and benefits
Sine-wave filters prevent disturbing pulses to be transmitted to downstream motors. Capacitances in screened motor supply cables can otherwise cause high oscillating circuit currents through motor bearings, vaporising lubricant and causing damage to the bearings. The eddy current losses in the motor can also be minimised in this manner, resulting in a cooler motor and thus extended motor life-time.
Protects the drive
In addition to protecting the motor, the sine-wave filter also provides protection for the inverter, because the lower pulse load is reflected in lower semiconductor losses.
Features and benefits
• Protects the motor against dU/dt stress which prolongs the lifetime
• Lowers the frequency depending losses in the motor, eddy current losses and stray flux losses
• Diminishes acoustic switching noise on the motor
• Reduces semi conduct losses in the drive with long motor cables
• Decreases electromagnetic radiated emissions on unscreened motor cables
• Reduces voltage peaks
• Reduces electrical discharges in the motor construction thus prolonged bearing life time
• Compatible with all control principle including flux and WC+
• Parallel filter installation is possible with applications in the high power range
16 Cedarhurst Road, Newtownbreda Factory Estate, Newtownbreda, Belfast, BT8 7RH.
Tel NI: 028 90645 060 Tel GB: 0870 178 0056 Tel ROI: 1890 719 312 Email: sales@greenvilleidc.com
JSR Technology