LDO sc Process Sensor - Dissolved Oxygen

LDO sc Process Sensor - Dissolved Oxygen

LDO sc Process Sensor – Dissolved Oxygen

Firstly, this instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.

  • Extremely reliable – 36-month warranty on probe
  • The optimised temperature sensor and the new 3D factory calibration make O2 measurement even more accurate
  • No electrolyte or membrane changes necessary
  • Remote functions for simple and convenient data transfer via Internet and SMS
Get a QUOTE today – Call ROI: +353(0)42 950 2210

Price Excluding VAT

£1,575.45

LDO sc Process Sensor – Dissolved Oxygen

Firstly, this instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.

  • Extremely reliable – 36-month warranty on probe
  • The optimised temperature sensor and the new 3D factory calibration make O2 measurement even more accurate
  • No electrolyte or membrane changes necessary
  • Remote functions for simple and convenient data transfer via Internet and SMS

Finally, for more information about the LDO sc Process Sensor for Dissolved Oxygen Click here.

Get a QUOTE today

Short Code

Accuracy

±0.1 mg/L @ DO < 5 mg/L

Cable Length

10 m

Calibration Method

All probes are factory calibrated and ready to use
Air calibration: one point, 100% water saturated air
Sample calibration: comparison to standard instrument

Communication

Modbus via SC200 or SC1000 controller

Diameter

48.25 mm

Dimensions (D x L)

48.25 mm x 254 mm

Flow Rate

None Required

Hazardous Location Ratings

ETL listed (cETLus marked) to Canadian and US General Safety and Hazardous (Class l, Div. 2)
Locations

Immersion Depth

15 m, 1050 kPa, maximum

Interferences

No Interferences from the following: H2S, pH, K+
, Na+
, Mg2+, Ca2+, NH4
+
, Al3+, Pb2+, Cd2+
,
Zn2+, Cr (total), Fe2+, Fe3+, Mn2+, Cu2+, Ni2+, Co2+, CN-
, NO3

, SO4
2-, S2-, PO4
3-, Cl-
, anion
active surfactants, crude oils, Cl2 < 4 ppm

Length

254 mm

Measuring Range

0.01 – 20.00 mg/L

Operating Temperature Range

0 – 50 °C

pH Range

0 – 12 pH

Pressure Range

Max. 3.5 bar

Protection Class

IP68

Relative Humidity

95 % (non-condensing)

Repeatabillity

±0.1 mg/L

Resolution

0.01 mg/L DO

Response Time

T95 < 60 s

Sensor Cable

10 m terminated with quick-disconnect plug

Sensor Thread

1" NPT outer thread

Sensor to Controller Distances (Maximal)

1000 m

Storage Conditions

-20 °C – 70 °C

Temperature Sensor

PT100 integrated, external sensor

Transmission Distances

100 m maximum when used with an extension cable

Warranty

Probe body: 3 years
Sensor cap: 2 years
In standard applications

Weight

1.0 kg (probe only)

Wetted Materials

Probe body: CPVC, Polyurethane, Viton, Noryl, 316 Stainless Steel 1.4404 (AISI 316L)
Sensor cap: Acrylic